NM2-IP-4L Tilt Meetsysteem

Tweeassig kantelmeetsysteem

Belangrijkste kenmerken

Measuring range ±3° up to ±60° or 0 - 90° per axis
Accuracy ±0,1° (up to ± 15°), 0,5% of measuring range (up to ±60°)
Analogue output 0 … (±)10 V or 0(4) … 20 mA (4-wire-technology)
Supply voltage 10 … 18 VDC or 18 … 30 VDC

About the NM2-IP-4L Tilt Measuring System

双重轴NM2工业倾斜测量系统-IP-4L is the combination of a non-contact inclination sensor AccuStar®-EA and sensor adapted electronics. The measuring system is designed for precise tilt measurement in X- and Y-axis and intended for ground assembly. Available tilt measuring ranges are ±3° to ±60°. The electrical wiring is realized in 4-wire-technology. For further evaluation of the measured inclination there are different standard analogue output signals per axis available, depending on the ordered type.

The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP66), which is well suited for applications in rough and industrial environments.

Heeft u deze sensor nodig voor uw volgende project?

Vraag vandaag nog een offerte aan of laat uw gegevens achter voor meer informatie van een van onze experts.

Praat met een expert

Product downloaden

Doe het op uw manier

Niet precies wat u zoekt? Wij bieden standaard lineaire potentiometers, maar kunnen je ook helpen met een op maat gemaakte lineaire positiesensor of een complete meetoplossing. Neem contact met ons op voor advies of prijzen.

Praat met een expert

Technische specificaties

Specificaties	Waarde
Accuracy at 23°c	Up to ±15°: ±0,1°, Up to ±60°: 0,5% of measuring range, Up to ±65°: on request
Analogue output / burden	0 - 10 V / ±10 V, max. 1 mA (short-time short-circuit proof) 0 - 20 mA, 4 - 20 mA, max. 500 Ω
Cross-sensitivity	< 1% up to ±60°
Dimensions (w x h x d)	160 x 91 x 160 mm (without EMC cable glands)
Electrical connection	M16 x 1,5 EMC cable glands on internal spring-cage terminal blocks
Enclosure	EMC-safe aluminium die-cast enclosure
Frequency range (-3 db)	2 Hz
Number of measuring axis	2
Power consumption	ca. 4 W
Preferred measuring range	±3°, ±5°, ±10°, ±15, ± 20, ±30, ±45°, ±60° other measuring ranges on request
Protection class	IP66
Supply voltage	10 - 18 VDC, 18 - 30 VDC, electronic is protected against voltage reversal
Temperature, operating	-20 - +60 °C
Temperature, storage	-20 to +60 °C
Voltage insulation between supply voltage and analogue output	Galvanic isolation between supply voltage and analogue output, 200 V, higher voltage insulation on request
Weight	2.300 g