12HHP Multi-turn Potentiometer
Hybrid Potentiometer (Bushingmount) 10-turn
Nyckelfunktioner
- Hybrid
- Dimensions (mm) DxL: 13x25.5
- Resolution: Essentially infinite
- Independent linearity (±%): 0.4 to 0.1
- Mechanical travel (+10° 0°): 3,600 +15° 0°
- Electrical travel (±5°): 3,600
About the 12HHP Multi-turn Potentiometer
The 12HHP is a small size, high resolution, long-life potentiometer with an outer diameter of 13mm.
Bushingmount type
- With lug terminals: 12HHP
- With pin terminals for pc board: 12HHP-10P
Servomount type
- 12HHPS-10
Special Specifications Available
5-turn type (S12HHP-5), shaft with front and rear extension (rear shaft with 0.8mm dia. and 10mm length), special machining on the shaft, simple sealed housing (in case of servomount type, the housing length becomes longer by 1.5mm).
Behöver du den här sensorn för ditt nästa projekt?
Begär en offert idag eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Gör som du vill
Inte exakt vad du letar efter? Vi erbjuder standardprodukter men kan också hjälpa dig med en skräddarsydd sensor eller en komplett mätlösning. mätlösning. Kontakta oss för rådgivning eller budgetpriser.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| 接触电阻变化 | Within 5% C.R.V. |
| Dielectric strength | 1 minute at 1,000 V.A.C. |
| Electrical travel | 3,600º ±5º |
| Independent linearity tolerance | Standard Class ±0.4%, Precision Class ±0.1% (±0.2% in case of within 5kΩ) |
| Insulation resistance | Over 1,000MΩ at 500V.D.C. |
| Mass | Approx. 109 |
| Max. practical resistance value | 100kΩ |
| Max. torque exerted on fastening the mounting nut to the bushing | Within 0.8mN·m (80kgf·cm) |
| Max. working voltage | 450V |
| Mechanical travel | 3600º+ 15º |
| Output smoothness | Within 0.05% against input voltage |
| Power rating | 1.0 W |
| Resistance temp. coefficient | ±100p.p.m./ºC |
| Resolution | Essentially infinite |
| Shaft dia. (mm) | 3 |
| Standard resistance values | 2k, 5k, 10k, 20k, 50k (Ω) |
| Starting torque | Within 3mN·m (30gf·cm) (Bushingmount type), Within 2mN·m (20gf·cm) (Servomount type) |
| Stopper strength | Approx. 0.15N·m (15kgf·cm) |
| Total resistance tolerance | Standard Class ±10%(K), Precision Class ±5%(J) |
Relaterade produkter
Behöver du något annat?
20HHP Multi-turn Potentiometer
- Measuring range 5 or 10 turns
- High resolution, long-life potentiometer
- Various special specifications available
22HHP Multi-turn Potentiometer
- Measuring range 3, 5 or 10 turns
- Low-cost & high resolution
- Various special specifications available
46HDS Multi-turn Potentiometer
- Measuring range 3, 5, 10, 15, 20 or 30 turns
- Resistance range 10Ω-20kΩ to 50Ω -200kΩ
- 46 mm outer diameter