FSCB50A Sinus Cosinus Potentiometer
Non-Linear Conductive Plastic (Servomount) SIN/COS Potentiometer
Nyckelfunktioner
- Dimensions (mm) DxL: 50.8×26
- Element: conductive plastic
- Function characteristics: 360°sin/cos
- Conformity peak to peak (± %): 0.5 to 0.2
- Mechanical travel: 360°
- Electrical travel: 360°
About the FSCB50A Sinus Cosinus Potentiometer
The FSCB50A is a servomount type potentiometer with ball bearings and precision sine/cosine output. It is available in multiple diameters.
Standard Specifications Available
Multi-ganged (available up to 3 gangs. Housing length is extended by 16mm per 1 gang), shaft with front and rear extension (rear shaft with 6mm dia. and 15mm length), bushingmount type, shaft dia. (ø6.35mm) with inch dimensions, special machining on the shaft, oil-filled type.
Behöver du den här sensorn för ditt nästa projekt?
Begär en offert idag eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Gör som du vill
Inte exakt vad du letar efter? Vi erbjuder standardprodukter men kan också hjälpa dig med en skräddarsydd sensor eller en komplett mätlösning. mätlösning. Kontakta oss för rådgivning eller budgetpriser.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Precision Class ±0.3% | |
| Precision Class ±10% (K) | |
| Super Precision Class ±0.2% | |
| Conformity tolerance (peak-peak) | Standard Class ±0.5% |
| Contact resistance variation | Within 8% C.R.V. |
| Dielectric strength | 1 minute at 1,000V.A.C. |
| Electrical travel | 360º (Endless) |
| Insulation resistance | Over 1,000MΩ at 500 V.D.C. |
| Mass | Approx. 120g |
| Max. working voltage | 250V |
| Mechanical travel | 360º (Endless) |
| Output smoothness | Within 0.1% against input voltage |
| Power rating | 1.25W |
| Resist. temp. coefficient | ±400p.p.m./ºC |
| Resolution | Essentially infinite |
| Shaft dia. (mm) | 6 |
| Special higher practical resistance values | 20k, 50k, 100K (Ω) |
| Standard resistance values | 1k, 2k, 5k, 10k (Ω) |
| Starting torque | Within 5mN·m (50gf·cm) |
| Total resistance tolerance | Standard Class ±15% (L) |
Relaterade produkter
Behöver du något annat?
MPH22 Motor Potentiometer
- Measuring range: 1 or 10 turns
- Slipping Torque: 20-30 mN*m or 50 mN*m
- Reduction gear ratio: multiple
MA Turns-counting Dials Potentiometer
- Measuring range: 3, 5, 10, 15, 20
- Analog readout
- Elegant appearance & rigid construction
MB Turns-counting Dials Analog Type Potentiometer
- Measuring range: 10 turns
- Analog window readout
- For use with Helicalohm Potentiometers