FAC Series Crack Detection Strain Gauges
Designed to measure the propagation speed of fatigue crack in a metal specimen
Nyckelfunktioner
- Applicable on:Metal & concrete
- Operational temperature:-30~+80°C
- Special plastics backings, Cu-Ni element
- Gauge resistance: approx. 1Ω
- Measuring range: 4.5mm, 20mm
- Backing size 28x5mm, 43x25mm
About the FAC Series Crack Detection Straingauge
FAC series crack detection gauge
These gauges are designed to measure the propagation speed of fatigue crack in a metal specimen. The gauges are bonded with an adhesive on the position where the crack is initiated or the crack initiation is expected. The grids of the gauges, which are aligned at interval of 0.1mm or 0.5mm, are disconnected one by one with the propagation of the crack. The gauges are used together with the crack gauge adaptor CGA-120B, and the disconnection of one grid is measured as the change of approx. 45 or 40×10-6strain by a strainmeter.
Behöver du den här sensorn för ditt nästa projekt?
Begär en offert idag eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Gör som du vill
Inte exakt vad du letar efter? Vi erbjuder standardprodukter men kan också hjälpa dig med en skräddarsydd sensor eller en komplett mätlösning. mätlösning. Kontakta oss för rådgivning eller budgetpriser.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Applicable specimen | Metal, concrete |
| Backing | Special plastics |
| Bonding adhesive | CN, RP-2 |
| Element | Cu-Ni |
| Fatigue life at room temperature | - |
| Operational temperature(°c) | -30~+80°C |
| Strain limit | - |
| Temperature compensation range(°c) | - |