ALL Single Point Load Cell

Nyckelfunktioner

Capacity: 3, 5, 10, 15, 20, 30, 50kg
Combined error ≤ ±0.02% (0.017% C4; 0.014% C5)
Aluminium alloy
Protection class IP65

一般信息

The ALL platform load cell is suitable for series use in weighing and batching systems, level measurement equipment and general force measurement systems where accurate measurements are required at low cost.

Features

Measuring range: 3, 5, 10, 15, 20, 30, 50kg
Aluminum alloy
Combined error: ≤±0.02% (0.017% C4; 0.014% C5).
Protection class: IP65
Approved according to OIML R60 C3, optional C4 and C5.

Options

ATEX approval Ex II 1GD (zone 0-1-2-20-21-22)
OIML R60 C4
OIML R60 C5
Stainless steel bracket

Safety notice:
When used as a tensile force transducer, it is essential to install additional safety measures such as catch straps, catch chains, etc., so that the load is absorbed in the event of a breakage of the transducer, which can never be completely ruled out.

Behöver du den här sensorn för ditt nästa projekt?

Begär en offert idag eller lämna dina uppgifter för att få mer information från en av våra experter.

Prata med en expert

Produktnedladdningar

All single point loadcell en

Gör som du vill

Inte exakt vad du letar efter? Vi erbjuder standardprodukter men kan också hjälpa dig med en skräddarsydd sensor eller en komplett mätlösning. mätlösning. Kontakta oss för rådgivning eller budgetpriser.

Prata med en expert

Tekniska specifikationer

Specifikation	Varde
Compensated temperature range	-10 °C / +40 °C
Creep at nominal load in 30 minutes	0.015%
Deflection at nominal load	0.5 mm
Input resistance	409 Ω ±6
Insulation resistance	≥5000 MΩ
Max supply voltage without damage	18 V
Measurement range	3, 5, 10, 15, 20, 30, 50kg
Operating temperature range	-35 °C / +65 °C
Output resistance	350 Ω ±3
Rated output	2 mV/V ±10%
Safe overload (% of full scale)	150%
Temperature effect on span	0.0014% °C
Temperature effect on zero	0.0017% °C
Ultimate overload (% of full scale)	300%
Zero balance	≤ ±2%