Because non-accelerating systems must have equal reactions to actions produced, it is often possible to measure output torque by measuring reaction forces acting on the devices housing.This sensor is ideal for measuring reaction or restraining torque in motor, pump, and fixture mounts. These hollow sensors are well suited for limited rotation applications.
01165-01171 Reaction Torque Sensor
Torque transducer with flange
Nyckelfunktioner
- Capacity: 6, 11, 23, 57, 113, 226, 395, 585, 1.130, 1.695, 2.260, 3.390, 4.520, 5.850, 11.300, 19.775, 22.600 Nm
- 150% of F.S. Overload capacity
- Non-linearity: 0.10% of F.S.
- Hysteresis: 0.10% of F.S.
- -54 to +121°C Operating temperature
About the 01165-01171 Flange Torque Sensor
Behöver du den här sensorn för ditt nästa projekt?
Begär en offert idag eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Gör som du vill
Inte exakt vad du letar efter? Vi erbjuder standardprodukter men kan också hjälpa dig med en skräddarsydd sensor eller en komplett mätlösning. mätlösning. Kontakta oss för rådgivning eller budgetpriser.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Bridge resistance | 700/350 Ohms |
| Capacity | 6 - 22600 Nm (50 to 200,000 in.lb.) |
| Compensated temperature | 70 to 170°F |
| Excitation voltage, maximum | 20 Vdc |
| Hysteresis | 0.10% of F.S. |
| Non-linearity | 0.10% of F.S. |
| Output at f.s | 2.0 mV/V nominal |
| Overload capacity | 150% of F.S. |
| Temperature effect on span | 0.002% of Rdg./°F |
| Temperature effect on zero | 0.002% of F.S./°F |
| Useable temperature | -65 to +250°F |
| Zero balance | 1.00% of F.S. |
Relaterade produkter
Behöver du något annat?
ATDTD-S Reaction Torque Sensor
- Measuring range: 0 - 10 to 0 - 50.000 Nm
- Environmental Protection: IP65
- Custom Capacities to 200 kNm+
ATF311 Reaction Torque Sensor
- Measuring ranges: 0 - 2 Nm to 0 - 1.000 Nm
- IP65 Environmental sealing
- -10 to + 80 °C Operating temperature