10HP Multi-turn Potentiometer

World's smallest 10-turn Potentiometer (5-turn and 10-turn)

Nyckelfunktioner

Wirewound
Dimensions (mm) DxL: 10.5×19.2 / 10.5×25.5
Resistance range (ohm): 100Ω-20kΩ/ 100Ω-50kΩ
Linearity (±%): 0.35 to 0.2 / 0.25 to 0.1
Mechanical travel (+10° 0°): 1,800 +30° 0° /
3,600 +30° 0°
Electrical travel (±5°): 1,800 / 3,600

About the 10HP Multi-turn Potentiometer

The Multi-turn Potentiometer 10HP is world's smallest 10-turn potentiometer. The potentiometer is available in 5-turn models and 10-turn models.

Features Multi-turn potentiometer 10HP-5

Wirewound
Dimensions (mm) DxL: 10.5×19.2
Standard resistance range (ohm): 100Ω-20kΩ
Independent linearity (±%): 0.35 to 0.2
Mechanical travel (+10° 0°): 1,800 +30° 0°
Electrical travel (±5°): 1,800

Features Multi-turn potentiometer 10HP-10

Wirewound
Dimensions (mm) DxL: 10.5×25.5
Standard resistance range (ohm): 100Ω-50kΩ
Independent linearity (±%): 0.25 to 0.1
Mechanical travel (+10° 0°): 3,600 +30° 0°
Electrical travel (±5°): 3,600

Special Specifications Available

3turn type (S10HP3), lower resistance values (20Ω, 50Ω), shaft dia. (ø3.175mm) · bushing with inch dimensions, special machining on the shaft, shaft with front and rear extension (rear shaft with 0.8mm dia. and 10mm length).

Behöver du den här sensorn för ditt nästa projekt?

Begär en offert idag eller lämna dina uppgifter för att få mer information från en av våra experter.

Prata med en expert

Produktnedladdningar

10hp multi turn potentiometer en

Gör som du vill

Inte exakt vad du letar efter? Vi erbjuder standardprodukter men kan också hjälpa dig med en skräddarsydd sensor eller en komplett mätlösning. mätlösning. Kontakta oss för rådgivning eller budgetpriser.

Prata med en expert

Tekniska specifikationer

Specifikation	Värde
	(within 5kΩ): (±0.25%) (±0.15%)
	Precision Class: ±0.2% ±0.1%
Dielectric strength	1 minute at 500 V.A.C.
Electrical travel	360º Xn ±5º (n: No. of turns)
Independent linearity tolerance (5-turn 10-turn)	Standard Class: ±0.35% ±0.25%
Insulation resistance	Over 100 MΩ at 500 V.D.C.
Mass	Approx. 17g (5-turn), Approx. 20g (10-turn)
Max. practical resistance value	50kΩ (5turn), 100kΩ (10turn)
Max. torque exerted on fastening the mounting nut to the bushing	Within 1N·m (10kgf·cm)
Max. working voltage	450 V
Mechanical travel	360º Xn + 30º 0° (n: No. of turns)
Noise	Within 100O E.N.R.
Power rating	0.5W (5-turn), 1.0W (10-turn)
Resist. temp. coefficient of wire	±20p.p.m./ºC
Shaft dia. (mm)	4
Standard resistance range	100Ω to 20kΩ (5turn), 100Ω to 20kΩ (10turn)
Starting torque	Within 3mN·m (30gf·cm)
Stopper strength	Approx. 0.1N·m (1kgf·cm)
Total resistance tolerance	标准类±3%(H), Precision Class ±1%(F)