AKA 300 LC Series Triaxial Analog MEMS Accelerometer
Triaxial, analogue MEMS accelerometer for low power and high stability.
Key Features
- Up to 1000 Hz bandwidth
- Ruggedized for harsh environment operation
- IP67 rating
- High Sensitivity with 1mg resolution
- 4-20mA output
- 9-36Vdc input voltage
- 2 meter cable whip (Included)
- M12 connector
About the AKA 300 LC Series
The AKA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability.
Key features AKA 300 LC Series
- Triaxial Configuration
- Measuring ranges of ±2G thru ±40G
- 100g shock protection
- Up to 1000 Hz bandwidth
- Ruggedized for harsh environment operation
- IP67 rating
- High Sensitivity with 1mg resolution
- 4-20mA output
- 9-36Vdc input voltage
- 2 meter cable whip (Included)
- M12 connector
Applications AKA 300 LC Series
- Tower Cranes
- Wind Power Monitoring
- Robotics
- Traffic System Analysis
- Low Frequency Vibration Measurement
- Medical Equipment testing
- Automatic Control Systems
- Large Machinery Monitoring
- Vehicle Testing
- Specifications
- Datasheets
Specifications
Measurement Range, (g)
±2, ±4, ±8, ±10, ±20, ±40
Output Signal (mA)
4 - 20
Calibration Deviation (mg)
<1.0
Measuring Axis
X, Y, & Z (3-axis)
Bias Temp Coefficient (%/°C)
0.01
0° Output Error (mA)
<0.005
Cross Axis Sensitivity (%)
1.0 -2.0
Resolution @ 1Hz (mg, max)
<1.0
Nonlinearity (% of Full Scale, Max.)
<0.5, <0.5, <0.8, <1.0, <1.0, <1.0
Sensitivity (±10%, mV/g)
1250.0, 625.0, 312.5, 250.0, 125.0, 62.5
Frequency Response (Hz)
500
Bandwidth (Hz, 3db)
725
Input Voltage (Vdc)
9 to 36 Vdc
Operating Current
<60mA at 12Vdc
Operating Temperature
-40°C to +85°C
Weight (grams)
73.5
Enclosure Dimensions
34.3mm (L) x 34.3mm (W) x 38.5mm (H)
Seal
IP67
Datasheets
Downloads
Share this page by:
Related services
/ 2
Service
Calibration
Take advantage of our calibration technology – for new purchases as well as existing equipment. Regular calibration by Althen ensures that your sensors and testing equipment are working accurately. This is the only way to get meaningful, correct results over the long run.
Read more
Service
Training & Consulting
Read more